Order now

Ordering

You have several convenient options for submitting an order.

1. Call (718) 498-6250 and place the order by phone.

2. Fill out and Print this order form and FAX it to (718) 922-3978. Measuring instructions are located below

3. PRINT the Order form and mail it with a check or money order to:

National Metal Enclosures

2618 Atlantic Avenue

Brooklyn NY 11207

Click here for a printable Order Form

-Order form requires Adobe Reader - Click here to download FREE Adobe Reader-

How to measure

Please read these instructions carefully. You’ll measure the length, height and depth of your radiator. Then, to each of these dimensions, ADD 1 inch for clearance. (Measure 2 or 3 times to be sure the measurements are accurate.)

Remember, these custom radiator enclosures are custom-cut just for you, and are non-returnable.

RADIATOR COVER LENGTH (See diagram A) Measure beyond pipes and valves at both ends of the radiator. ADD a minimum of 1 inch.

RADIATOR COVER HEIGHT (See diagram B) Measure from the floor to the top of the radiator or valve (in open position), whichever is higher. ADD a minimum of 1 inch.

RADIATOR COVER DEPTH (See diagram C) Measure the depth of the radiator at its deepest point. (This is usually, but not always, at the radiator feet). ADD a minimum of 1 inch.

We suggest you add at least 1 inch to the length, height and depth of your radiator grille. A custom radiator enclosure that is a little large will slip on easily and still provide the elegant “fine furniture” appearance you are looking for. (One too small will not go on at all!).

Colors

Available Baked Enamel Finishes

To be used as a guide only

Colors may be different on monitors and printers

White

Antique White

Off White

Pecan

Chinese red

Dark Green

Fawn

Gray

Coppertone

Almond

Black


White	Antique White	Off White	Pecan	Chinese red

Dark Green	Fawn	Gray	Coppertone	Almond

Black